Nock Skinex SB 496 Automatic Fish Skinning Machine

Brand: Nock
Type: cutting width: 430 mm
Location: Germany
U/M: Each

Available Options


* Skinex SB 496:





Nock Skinex SB 496 Automatic Fish Skinning Machine

Automatic Fish Skinner with S technology and special application for low loss skinning of fish with thin skin

Features and application range

  • cutting width: 430 mm
  • cutting speed: 19 m/min
  • conveyorized fish skinner with S technology and special application for low-loss skinning of fish with thin skin, e.g. tilapia, pangasius (basa), trout, cod, catfish, squid etc. 
  • 3 methods of skinning:
    - deep skinning with sharp blade
    - thin skinning (shallow skinning) with sharp blade
    - pulling-off the skin with blunt blade (silver skinning)

Standard equipment

  • transport roller without grooves, with counter rotating cleaning roller made of stainless steel
  • water cleaning unit for steady continuous operation
  • blade gap infinitely adjustable
  • spring suspended blade holder for perfect skinning results
  • depending on the product, pressure roller spring suspended and with airfilled balloon or with special hard pressure roller for fish with adjustable balance weights
  • infeed conveyor and discharge conveyor; can be taken out of the machine within seconds without any tools
  • Nock power plates for a machine construction which is easy to clean, for outstanding robustness and service friendliness
  • Nock easy flow safety cover
  • lockable castors
  • stainless steel
  • stainless steel bearings

Options

  • discharge conveyor for removed skin
  • transport roller with coarse toothing
  • foot switch and infeed table for “manual” operation with open top machine
  • turn around device for the automatic skinning of both sides of flat fish with 2 machines
Technical data Skinex SB 496

cutting width

430 mm

cutting speed

24 m/min

maximum throughput height

70 mm

blade gap

0 - 5 mm infinitely adjustable

apply length on infeed conveyor

400 mm

infeed conveyor (1)

850 x 425 mm

discharge conveyor (1)

850 x 425 mm

overall dimension W x H x D

800 x 1190 x 1860 mm

weight

240 kg

motor performance

0.75 kW

electrical connection

3 AC - 400 V - 50 Hz

IEC 60309 16 A 6h

other voltages upon request

water connection

G 1/2 female thread

water consumption

approx. 200 l/h

compressed air

not required