Crate Washer 150

Type: Capacity: 150 Crates/hour
Country of Origin: Germany
Ships from: FOB Brampton
U/M: Each
Stock: On Order
CM: 8515
Financing Available
Note: Shipping to be determined
Crate Washer Options:


Crate Washer 150

Heim Stainless Solutions Made in Germany

Compact conveying crate washing machine comes with integrated main wash and rinsing zone, for fast and effective cleaning of slight to moderately contaminated plastic crates.

The unit is divided into a main wash and a rinsing zone. In the main wash zone the crates are cleaned with circulating water which is invariably kept at the desired temperature by the installed tank heater.

The water of the main wash zone is constantly filtered by the filtration system. In the rinsing zone the crates are rinsed with clean fresh water and subsequently conducted into the tank of the main wash zone to be re-used.

This procedure achieves superb wash results while minimizing water, energy, and chemical consumption.

Following is the blow off zone that can be added to this piece of equipment. The crates are blown off with cold air from all sides by a high-pressure blower with high drying efficiency.

In order to ensure an optimal cleaning of all faces, the crates are transported by a conveyor chain at even distances through the unit; the installed rotatable Clip-eyelet flat nozzles ensure an efficient cleaning of the crates.

Specifications:

  • Capacity: 150 per hour (step switch option allows 100-200 per hour)
  • Stainless steel
  • Washing temperature: 30- 55°C adjustable
  • Rinsing temperature recommended: 50 - 85 °C (provision by the customer)
  • Height adjustable

 

Crate Washer without Blower

Crate Washer with Blower

Dimensions L x W x H

2300 x 800 x 1625mm

3300 x 800 x 1600mm

Belt Speed

1,75 mtr./min

1,75 mtr./min

Belt drive

0,6kW

0,6kW

Power

2,2kW

2,2kW

Water circulation through the washing nozzles

500 l/min

500 l/min

Tank capacity

200 liters

200 liters

Water consumption approx.

0,5 – 0,6 l/crate

0,5 – 0,6 l/crate

Tank heating

1 x 9kW – Electrical screw-in heater

1 x 9kW – Electrical screw-in heater

Nozzle

Clip-eyelet, rotatable flat jet nozzles

Clip-eyelet, rotatable flat jet nozzles

Filter system

AISI 304 removable insert filter, 2mm perforation

AISI 304 removable insert filter, 2mm perforation

Directional control

Integrated in the hold-down system

Integrated in the hold-down system

Conveying system

Transport chain with carrier

Transport chain with carrier

Electrical connection

400V / 50Hz, 3Ph + N + PE

Other options available upon request

400V / 50Hz, 3Ph + N + PE

Other options available upon request

Control voltage

24V

24V

Total voltage

12kW

12kW

Water connection

2 x 1/2”1- 10 bar, cold or warm water

2 x 1/2”1- 10 bar, cold or warm water

Rinsing

1 x circumferential nozzle rings

1 x circumferential nozzle rings

Nozzle

Brass flat jet nozzles

Brass flat jet nozzles

Water pressure at nozzle

2 bar

2 bar

Blower

N/A

1 x 5.5kW

Tank emptying

1 x 1 ½ inch ball valve

1 x 1 ½ inch ball valve

 

Options

  • Drying module – Heating system with higher air blowers and uses electric energy
  • Drying via centris - Pallet spinner to remove excess water with less energy consumption
  • Water filtration
  • Fume extraction exhaust system
  • One-man operation
  • With conveyor belts
  • Dosing pump

*Can be customized according to customer requirements*